Formulation Characteristics
Complete Specifications
Blend Composition (Per mL)
Physical Properties
HSN Blend is a composite preparation of nine B-vitamins and related compounds supplied in aqueous solution rather than as a lyophilized powder,. Its constituents are Biotin, Niacinamide, Pantothenic Acid, Thiamine, Riboflavin, Niacin, Folic Acid, Choline and Inositol. Because the formulation contains multiple distinct small molecules, overall molecular formula and molecular weight are inherently variable. The characteristic yellow colour derives from the riboflavin fraction and is expected.
Analysis & Documentation
Identity
Each production lot is checked against the reference structure recorded for this compound:
- Classification — Multi-component B-vitamin solution blend
- Molecular formula — Variable (multi-component blend)
- Expected mass — Variable (multi-component blend)
- CAS registry — Not assigned (multi-component blend)
- PubChem CID — Not available
Analytical Methods
Testing is carried out per lot by an independent laboratory. The methods measure what the material is and how much of it is the target compound:
- RP-HPLC — reverse-phase separation of the target from process-related impurities; purity is reported as area percent of the main peak
- Mass spectrometry — observed mass compared against the expected molecular mass above
- Retention time — compared against a reference standard run under the same conditions
- Chromatogram — reproduced on the certificate so the peak and any shoulders can be inspected directly
Material & Documentation
What arrives, and how to tie it back to its paperwork:
- Appearance as supplied — Clear yellow to amber solution
- Lot number — printed on the container label and used to look up the certificate
- Certificate — indexed by lot at Certificates of Analysis
Laboratory Handling and Storage Protocols
Unopened Vial Storage
- Store refrigerated at 2°C to 8°C in the original sealed vial
- Protect from light — retain in the outer carton until use
- Do not freeze; freezing may cause precipitation
- Brief excursions to room temperature during handling are acceptable
In-Use Storage and Handling
- Use aseptic technique at every withdrawal
- Return to refrigerated storage promptly after each withdrawal
- Inspect visually before each use
- Discard if discoloration, cloudiness, or particulates are observed
Stability Characteristics
HSN Blend is a multi-component B-vitamin research solution. Unlike the lyophilized preparations elsewhere in this catalogue, it requires no reconstitution, and its stability profile is governed chiefly by light exposure and temperature. The riboflavin and folic acid fractions are photosensitive and degrade measurably under prolonged direct light, which is why light-protected storage is specified rather than merely recommended. The solution should not be frozen, as freeze–thaw cycling can drive precipitation of the less soluble constituents and alter the effective concentration. A gradual deepening of the yellow colour, cloudiness, or visible particulate formation indicates the material should be discarded. When handled according to standard laboratory protocols, the blend maintains compositional consistency suitable for in vitro and analytical research applications.
Frequently Asked Questions
What is HSN Blend?
HSN Blend is a multi-component solution of nine B-vitamins and related compounds in a single sealed 10 mL vial, at 155.2 mg/mL total content. It is not a peptide and not a lyophilized powder; it is supplied as a clear yellow to amber aqueous solution.
What does each vial contain?
Per millilitre, each vial supplies:
-
Niacinamide 50 mg, Thiamine HCl 50 mg, Pantothenic Acid 25 mg
-
Choline 10 mg, Inositol 10 mg
-
Niacin 5 mg, Biotin 5 mg
-
Folic Acid 100 mcg, Riboflavin 100 mcg
That is 155.2 mg/mL of total content, or approximately 1,552 mg across the full 10 mL vial.
Is this a peptide?
No. This is a multi-component vitamin blend, not a peptide. Its constituents are individual small molecules, so the formulation has no single CAS number, molecular formula, molecular weight, or amino acid sequence. Analytical characterisation is performed per component.
How is HSN Blend supplied?
The blend is supplied as a clear yellow to amber solution in a sealed 10 mL vial. The yellow colour derives from the riboflavin fraction and is expected rather than a sign of degradation.
How should HSN Blend be stored?
Store refrigerated at 2°C to 8°C, protected from light; do not freeze. Keep the sealed vial in its outer carton, and discard it if discoloration, cloudiness, or particulates appear.
Does this blend require a Certificate of Analysis (COA)?
Yes. Each production lot is analysed by an independent third-party laboratory to verify the identity, concentration, and purity of the constituents. A lot-specific COA is generated for every batch and is available for the exact lot supplied.
Is HSN Blend FDA-approved?
No. This blend is not approved by the FDA or any comparable regulatory authority for human or veterinary use. It is sold strictly for research and educational purposes and is not intended to diagnose, treat, cure, or prevent any disease.
This product is not for human consumption. It is sold strictly for research and educational purposes and is not intended to diagnose, treat, cure, or prevent any disease.
Any clinical data or research information referenced on this page is derived from peer-reviewed scientific literature and official publications. This information is provided for educational reference only and does not constitute medical advice or product claims.
By purchasing this product, you acknowledge that you are a qualified researcher and agree to use it in full compliance with all applicable laws and regulations.
